 |
 |
 |
 |
Shimpo DT-209X Data Logging LASER non-contact/contact hand held tachometers. DT-209X will "stream" live readings to your PC. (software and cable required). The DT-209X is equipped with DATA COLLECTION features that adds flexibility in the field for Maintenance, Quality Control and R&D professionals. Simultaneous storage of data in three different measuring modes (USB, Standard, and Average). DT-209X offers incredible value and ease of use in Contact and Non-contact applications. Enhanced download features and online controls, showing trending and real time data via USB communication and Analog output; you can easily access your data with the included Software and USB cable. Hardy Die-cast Aluminum Housing-not plastic. One of the most advanced handheld tachometers on the market! One year warranty. Free N.I.S.T. certificate included.
- Measuring Range: 6 - 99,999 rpm
- Measuring Range: Contact 0.8 - 25,000 rpm
- Accuracy ±1 rpm: 6 - 8,300 rpm/ ±2 rpm: 8,301- 25,000 rpm/ ±0.006% of reading/ ±1 digit (or 7 rpm max.): 25,001- 99,999 rpm
- Display: 5 digit 0.47 (12 mm) high LCD
- Measurement Types: RPM: (Non Contact up to 14 away) Contact: ypm, mPM, fpm, ipm and Length; yd, m, ft, in, linear rate and length: using contact adapter included and 6 or 12 circumference wheels.
- Measureasuring Mode: USB mode; PC online measuring/standard (STD) mode; Standard measuring / Average (AVE) mode; Average data measuring STD mode; 24 blocks, 10 points/block (Total; 240 data) AVE mode; 30 blocks (Last, Max, Min, Average data in each block). Date and hour of start/finish are stored in each block. (Can download data with USB communication.)
- USB communication: USB 1.1
- Analog output: Max. 1 V
- Display Update Time: 1 second (typical)
- Detection Laser diode
- System Control: Single-chip C-MOS microprocessor
- Over Range Indicator: Flashing numerals
- Voltage Requirement: (2) "AA" 1.5 V Batteries
- Low Battery Indicator: Flashing LO BAT display
- Auto Power Shut-Off (except in USB mode)
- Battery Life: 15 hrs Approx.
- Operating Environment: Non-corrosive
- Operating Temp Range: 32° - 113°F (0 - 45°C)
- Construction: Die-cast aluminum housing
- Weight: DT-209X: 0.9 pound (400g)
- Dimensions: 6.6L x 2.4W x 1.8H (167.5 mm x 60 mm x 46 mm)
- Warranty: 1 year
- Includes: Reflective tape, 2 cone adapters, funnel adapter, 3 1/2 Extension shaft carrying case, NIST certificate, Master Wheel (6 cir.) and 200L adapter, USB cable, case, Application software (CD-R).
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Laser Non-Contact/Contact Tachometer
- Data Logger-collects data instantly
- All Metal Construction-no plastic here
- 5 digit display LCD
- High Accuracy For critical MRO and QC rate and LENGTH measurements
- Wide measuring capability 0.8 - 25.000 RPM
- (Contact mode) 6.0 99,999 rpm (Non-contact mode)
- Software and USB cable provided Nothing extra needed, complete kit.
- 3 Modes: Standard, USB, Average Data may be collected 3 ways, Graphing capability available for view as it occurs in USB mode. Data saved in .csv format, which can be opened by spreadsheet programs
- Scalable 1-volt analog output (USB mode) Great for chart recording and simultaneous display of data
- Long Range (1.5 M) Measuring Distance (non-contact LASER) Safer for high speed applications and confined spaces.
- AA Batteries or USB power Allows uninterrupted monitoring, great for life testing, batteries are not used whenever the USB cable is detected.
- 5 minute auto power off for battery operation.
- Synchronize clock for Standard and Average mode results.
- Time stamps data for better documentation.
- Standard Tripod Mounting lug: 1/4" x 20
|
|
 |
 |
 |
 |
|
 |

|