 |
 |
 |
|
The microprocessor-controlled DT-315A possesses the same great features of the DT-311A with the added convenience of total portability via its own internal power supply with up to one hour of full time, high intensity flash rate. Powered by rechargeable batteries located inside its rugged aluminum housing, the DT-315A also performs as an AC line-powered strobe when plugged into its standard AC adapter/charger unit. One year warranty.  DOWNLOAD A DATA SHEET DOWNLOAD THE USER MANUAL
- INTERNAL MODE
- Flashing Range: 40.0 - 35,000 FPM (flashes per minute)
- Accuracy: ±0.01 % of reading
- Resolution: 0.1 FPM 40.0 - 5,000, 0.2 FPM 5,000 - 8,000, 0.5 FPM 8,000 - 10,000, 1 FPM 10,000 - 35,000 FPM
- Phase Shift: Use +/- push buttons (360° in 6 seconds)
- Display Update Time: 0.2 seconds approx.
- Output Signal Synchronous: 400 μsec.
- Pulse output: 0 to +12 VDC amplitude (approx.), 4.7 KΩ impedance
- Rate Multiplier/Divider Multiply by 2, divide by 2
- EXTERNAL MODE
- Flashing Range: 0.0 to 35,000 FPM
- Accuracy: ±0.01 % ±1 digit
- Phase Shift: 0 to 359° with 1° resolution
- Delay Time: 0 to 2,000 μsec from 40 - 10,000 FPM
- External Trigger Input: 0 -0.8 VDC, HI level: 2.5 - 12 VDC or open collector (NPN), pulse width 50 μsec min. Input Impedance 4.7 KΩ to 12 V / 6.8 KΩ to 0 V
- GENERAL
- Display: 5 digits, 0.4" (10 mm) high, LED
- Flash Tube Power/Life: Xenon, 10W max. (100 million flashes)
- Flash Duration: 10 - 40 μsec
- Sensor Power Supply: 12 VDC (40 mA)
- Low Battery Indicator: Display shows all Ls
- Power Requirement Internal battery pack
- Operating Temperature Range: 32° - 104° F ( 0 - 40° C )
- Weight: 4.4 lb (2 kg)
- Dimensions 9.84" L x 4.72" W x 4.72" H (250 mm x 120 mm x 120 mm)
- Warranty 1 year
- Standard Accessories Fast charger
- OPTIONAL ACCESSORIES Carrying case, sensors
- FLASH DURATION: 10 15 ΅s
- SIGNAL OUTPUT: NPN Open Collector (24 VDC max., 50 mA) 150 ΅s typical
- PHASE SHIFT: Internal mode only by using the + and switches
- EXT. TRIGGER: 12-24 VDC thru a 3-wire NPN output sensor (requires external power supply).
- INPUT SIGNAL: 12 VDC thru a 2-wire proximity sensor. Or Switch or Relay contact.
- POWER REQUIREMENTS 115 VAC ±10% 60/50 Hz
- OPERATING TEMPERATURE 32° 104° F (0 40° C)
- DIMENSIONS: 9" L x 4.3" W x 8.5" H (Height includes handle)
- WEIGHT: 1.5 lbs. (0.7 Kg).
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Extruded aluminum construction- Exceptional durability
- Internal battery supply-Allows 4 hours of continuous duty on 1 charge
- Continuous duty cycle- Prevents downtime waiting for unit to cool
- Phase shift (in degrees of delay time) Enables observer to focus on one particular area of rotating and/or reciprocating machinery.
- Repeatable accuracy: (± 0.01% of reading) Provides reliable measurement results
- Microprocessor-controlled- Assures stability in changing temperature environments
- External trigger Unit is automatically synchronized with equipment
- Synchronous output Enables unit to drive other strobes
- Flash timer control Extends flash tube life
- Highly polished focused reflector Eliminates blind viewing areas
- Manual flash controller knob-Permits easy/accurate adjustments to flash rate
- Fast recharge cycle Minimizes downtime to only 2 hours
- 12 Month Warranty
|
|
|
|
|
|
|
|
|
