Small bearing heater with high heating capacity of up to 88 lb bearing

SKF TIH 030m combines high heating capacity with portability. The compact lightweight design makes the TIH 030m portable. Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 88 lb (40 kg). The heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 030m is equipped with a time mode for heating components other than bearings. The heater is supplied standard with three yokes. Power is 100-110V/50-60Hz.

Download Data Sheet.

Features:
Compact lightweight design 46 lb (20,9 kg)
2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption
Capable of heating a 61.7 lb (28 kg) bearing in just 20 minutes
Temperature mode pre-set at 110 °C (230 °F) to help prevent bearing over-heating
Automatic demagnetization
3 years warranty
Specifications subject to change without Notice.

SKF m₂₀ concept
"m₂₀" represents the weight (kg) of the heaviest SRB 231 bearing which can be heated from 20 to 110 °C (68 to 230 °F) in 20 minutes. This defines the heater's power output instead of its power consumption.

A	Induction coil outside the heater's housing allows shorter heating time and lower energy consumption
B	Foldable bearing support arms facilitate the heating of larger diameter bearings
C	Magnetic temperature probe helps prevent bearing overheating
D	Easy-to-use control panel and LED display integrated in a remote control
E	Internal storage for all 3 yokes reduces the risk of yoke damage or loss
F	Integrated carrying handle facilitates portability

• SKF m20 performance 28 kg (61.7 lb)
• 
  Voltage, V/Hz 100-110V/50-60Hz
• 
  Work piece:
• - Maximum weight 40 kg (88 lb)
• - Maximum bore diameter 20 - 300 mm (0.8 - 11.8 in)
  Temperature control:
• - Range 0 - 250 °C (32 - 482 °F)
• 
  Magnetic probe Yes, K-type
  Accuracy (electronics) ± 2 °C (± 3.6 °F)
• 
  Time control:  Range 0 - 60 minutes
  Accuracy ± 0.01 sec.
• 
  Maximum temperature (approx.) 400 °C (750 °F)
• 
  Thermometer mode Yes
• 
  Bearing mode Yes
• 
  Power setting 2-step; 50% or 100%
• 
  Demagnetization according to
• SKF norms (automatic) Yes (<2 A/cm)
• 
  Can heat sealed bearings Yes
• 
  Can heat pre-greased bearings Yes
• 
  Error guiding codes Yes
• 
  Thermal overload protection Yes
• 
  Control panel
• Control panel and LED display
• integrated in remote controle
  Operating area (w x h) 100 x 135 mm (3.9 x 5.3 in)
• 
  Coil diameter 95 mm (3.7 in)
• 
  Dimensions (w x d x h) 450 x 195 x 210 mm
• (17.7 x 7.6 x 8.2 in)
  Total weight, including yokes 20,9 kg (46.0 lb)
• 
  Maximum power consumption 2.0 kVA
• 
  Standard yokes
• 45 x 45 x 215 mm
• (1.7 x 1.7 x 8.4 in)
• for heating bearings with bore
• diameter of 65 mm (2.6 in)
• and larger.
• 28 x 28 x 215 mm
• (1.1 x 1.1 x 8.4 in),
• for heating bearings with bore
• diameter of 40 mm (1.6 in)
• and larger.
• 14 x 14 x 215 mm
• (0.5 x 0.5 x 8.4 in),
• for heating bearings with bore
• diameter of 20 mm (0.8 in)
• and larger
  Core cross section 45 x 45 mm (1.7 x 1.7 in)
• 
  Bearing support arms Yes, foldable
• 
  Yoke storage
• Yes, internal integrated in
• foldable bearing support arms
• 
  Cooling fan No
• 
  Swivel arm No
• 
  Housing material Steel and glass filled polyamide
  Warranty period 3 years