Easy-Laser® D150 has a combined detector/display instead of targets. The laser transmitter generates a laser plane that lies parallel to the reference pulley. The detector reads off the position in relation to the laser plane and displays the parallel and angle phase digitally live. This makes alignment of the adjustable machine extremely easy. The accuracy of the reading means that you can be within the prescribed alignment tolerances and rely upon the result. Suitable for most types of drive, such as V-belt, timing belt, flat belt and chain drives.
DOWNLOAD DATA SHEET

Suitable for use with most industrial flexible drive systems


Features

• Live digital offset and angle display readings
• Magnetic mounting for quicker installation
• Can also be attached using tape on non-magnetic pulleys thanks to low weight
• Works on all types of pulley without special accessories
• Also for pulleys of different widths
• For both horizontally and vertically mounted machines
• No training required for use
• One person can perform alignment
• Facilitates alignment and adjustment of belt tension at the same time
• Readings only need to be taken from one pulley and not both
• Significantly faster and easier than ruler and cord
• 2 year warranty

• Laser Transmitter
• Sheave diameters: 2.5" [60 mm] and larger
• Laser: Class 2, Output power <1 mW, Laser wavelength 635–650 nm
• Beam angle: 60°
• Accuracy: Laser plane – Reference plane Parallelity: < 0.05°, Offset < 0.008" [0.2 mm]
• Battery type: 1xR6 (AA) 1.5 V
• Battery operation: 8 hours continuously
• Housing Material: ABS plastics / Hard anodized aluminum
• Dimensions: BxHxD: 5.7x3.4x1.2" [145x86x30 mm]
• Weight: 9.52 oz [270 g]
• Detector Unit
• Displayed resolution: Changeable between mm/inch
• Axial offset: 0.005" [0.1 mm]. Angular value: 0.1°
• Max. displayed error: ±1 % + 1 digit
• Measurement Distance: Up to 9.8’ [3 m] between Transmitter and Detector
• Measurement Range: Axial offset: ± 0.12" [3 mm]. Angular value: ±3°
• Battery type: 1xLR61 (9V)
• Battery operation: 24 hours continuously
• Housing Material: ABS plastics
• Dimensions: BxHxD: 5.3x2.2x1.8" [135x56x46 mm]
• Weight: 7.76 oz [220 g]
• Specifications Subject to Change Without Notice.

Easy To Use:

Easy-Laser® BTA Digital2 is attached in a few seconds (magnets) with the laser transmitter on one of the sheaves and the detector on the other. The transmitter generates a laser plane parallel to the reference sheave. The detector reads the position in relation to the laser plane and provides a live digital display of both offset and angular value. This makes the alignment of the adjustable machine very simple. The accuracy of the digital readout also means that you can align within prescribed tolerances and rely on the result.